IATF 16949 Certification
Last updated

Definition of IATF 16949 Certification
IATF 16949 certification is independent confirmation that a manufacturer's quality management system meets IATF 16949, the quality standard for the automotive supply chain published by the International Automotive Task Force (IATF), a group of vehicle makers and their national trade associations. The current edition, IATF 16949:2016, replaced the earlier ISO/TS 16949 and is not a standalone document. It is written as a supplement to ISO 9001:2015, so a certified supplier must meet every ISO 9001 requirement as well as the automotive additions. These additions include the automotive core tools, such as failure mode and effects analysis (FMEA), a structured review of how a part or process could fail, and statistical process control (SPC). Each vehicle maker also adds its own customer-specific requirements. Only certification bodies recognized by the IATF may issue the certificate. It applies to sites that make production or service parts for automotive customers, and it is valid for three years, with surveillance audits at least once a year.
Why IATF 16949 Certification Matters for Your Business
If you buy molded parts that go into a vehicle, your own customer will usually decide whether your molder needs IATF 16949. Vehicle makers and most Tier 1 suppliers, the companies that sell directly to vehicle makers, require it for production parts. A supplier without it may be kept off an approved supplier list or excluded from new programs, however good its parts are. Some customers accept ISO 9001 from lower-tier suppliers, often with a second-party audit, in which the customer's own auditors check the site against selected automotive requirements. Check your customer's supplier manual before you shortlist anyone, because changing molder after the tool is built can add months of requalification.
To judge whether a certificate reflects real practice, ask to see its scope, which states the sites and products covered, and confirm it in the IATF's online certificate database. Then ask for evidence that the core tools are used on real parts, such as a process FMEA and a control plan, the document that lists each check made during production, for a job similar to yours. When you audit a molder in Taiwan or Southeast Asia, these documents show quickly whether the system is in daily use or kept mainly for the auditor.
Certification also carries a cost that appears in the quote, because the extra documentation, audits and gauge studies, which test the accuracy of measuring equipment, all add overhead. An IATF-certified molder may therefore price higher than an ISO 9001-certified molder for the same part.